Sizes
Widths –
20’, 24’, 30’, 36’ & 40’ standard
Custom widths available, add on adaptions available

Lengths –
Any length in 12’ increments, custom lengths available

Heights –
8’ to 16’ at eaves

Roof slope –
3/12 standard, custom slopes available

Structural Components
Posts –
8’, 9’ & 10’ eaves: 12 ga. galvanized 2’ x 3-¼’ C-profile
11’ & 12’ eaves: 12 ga. galvanized 3-½’ x 3-½’ C-profile
13’ & 14’ eaves: 11 ga. galvanized 3’ x 3’ square tubing
15’ & 16’ eaves: 9 ga. galvanized 4’ x 4’ square tubing

Roof & Side Purlins-
2-3/8’ high, 14 ga. galvanized hatbox channel

Wind Bracing –
¼’ galv. cable with 5/16’ eyebolts

Concrete Foundation –
Either 16’ x 3’ deep concrete piers with posts embedded in concrete or anchor bolts in built up slab edges

Roof Structure
Welded trusses of 12 ga., 14 ga. & 16 ga. channel bolted to posts & at center of truss with 1-½’ HDG bolts.
Square tubing diagonal bracing at each gable.

Coverings
29 ga. or 26 ga. metal galvanized, galvalume or painted/galvalume
Available in Pro Panel (residential or agricultural) or PBR Panel (commercial)
Variety of colors for panels, trim & fasteners
Trim includes: ridge cap, inside & outside corners, gable flashing, J-trim, gutters, downspouts & skylights

Side and Endwall Treatment
Fully sheeted, open or a combination

Available Extras
Walk-in doors, overhead doors, windows, insulation, concrete slabs and truck-wells.

Engineering
Imperial channel truss structures meet or exceed the ‘Florida Building Code’ Requirements