-
Rainbird H5 Pressure Compensating Heavy Wall Dripline-1/2″, 12″ Spacing, .42GPH, 1,000′ Roll
- 18 mm: OD 0.709″ (18.0mm), ID 0.619″ (15.7mm), wall thickness 0.045″(1.1mm)
- 12″ Spacing
- 0.42 gph (1.6 l/h)
1,000′ Roll
$106.20 -
IRRITEC 400 Series Poly Punch
This 7.0mm Punch is used to punch holes in your poly tubing for any 400 Barb fittings. The 400 barbs are compatible in our 3/4″ or larger poly tubing.
$11.81 -
IRRITEC Blue 3.5mm Poly Punch
IRRITEC Blue 3.5mm Poly Punch
Has Cleanout
$16.11 -
ANTELCO Key Punch
- Key Punch™ makes 0.12” hole in tubing and has a hexagonal base to install and remove spray jets and interchange their caps.
$0.69ANTELCO Key Punch
$0.69 -
ROBERTS/PRIMERUS Poly Punch .187 Tubing
Professionals use this punch, with its specially designed punch tip, for making holes in mainline poly tubing to insert 1/8″ poly tubing directly in without the use of a barbed coupler. After a short time the flexible poly will seal around the micro tubing creating a water-tight seal. This will also punch holes sized to insert any of the 1/4″ barbed fittings into your mainline.
USE ON .187 X .125 TUBING
$7.65 -
MicroJet C-Series Poly Punch/Wrench
-
This all-in-one tool is ergonomically designed to make snapping a hole into the 1/2-in poly tubing even easier
-
Has side guides to slide over the 1/2-in tubing to help hold into place and also act as a safety shield to the sharp hole punch tip
-
Has 1/4-in side slot to securely hold the barb ends of 1/4-in fittings while pushing 1/4-in vinyl onto it’s other barbed end
$1.94 -
-
-
Stainless Steel Geared Hose Clamps
1/2″, 3/4″ and 1″ Geared Hose Clamps, S.S.
#8, #10, #12
$0.94 – $1.04Stainless Steel Geared Hose Clamps
$0.94 – $1.04 -
Antelco Goof Plugs 1/4″ A42325
Used to plug holes in distribution pipe punched with standard emitter tool
Also 2-sided available for smaller/bigger holes
$0.06 -
MaxiJet Black Barb Stake w/36″ Tube Assembly
Stake Assemblies can be fitted with any one of the many Maxijet one-piece or two-piece jets, including MAX Jets, Spinners, Winged Jets, Caps, and Deflectors. Choose the type that best meets your needs.
HEAD NOT INCLUDED
$0.79 – $1.69MaxiJet Black Barb Stake w/36″ Tube Assembly
$0.79 – $1.69 -
Crimp Clamp Installation Tool
Crimp Tool for Ear Crimps and Cinch Clamps
$15.91 -
Stainless Steel Cinch Pinch Clamps
Keystone Pinch Clamps are mechanically attached and are quick and easy to install, and provide a uniform, tamper proof seal. They are widely used on both soft hose and rigid plastic pipe. You will find these clamps anywhere you connect poly pipe. Ear clamps are excellent for use in a multitude of irrigation and water supply systems, on fuel and vapor lines, to attach dust shields and air filters, for beverage supply lines, for car wash supply lines, and for securing bundles of cable.
BAGS OF 100
USED FOR 1/2″, 3/4″ AND 1″ POLY PIPE CONNECTIONS
$0.17 – $0.19Stainless Steel Cinch Pinch Clamps
$0.17 – $0.19
10%
Discount
For 50 or MORE 65P IMPACT SPRINKLERS
Time Limited Offer